the Extreme Flight
Edge 540T-EXP ARF
an extensive design process, Extreme Flight R/C
introduces the highly anticipated 48 inch Edge 540T
EXP. The second release in the EXP series, the Edge
540T features the same ultra-high quality construction,
features and performance that have made the Extra
300 EXP a "must have" for the legions of 3D and
aerobatic pilots out there.
Every bit as aggressive
and nimble as the Extra, the Edge is rock solid
in high alpha attitudes and may very well be the
easiest plane to harrier in existence. Aggressive
knife edge spins, tumbles, waterfalls, walls and
heart attacks are all well within the Edge's wide
Flip the rate switches to low and the Edge will
perform beautiful precision aerobatic maneuvers
and make a great sport flyer for pilots who have
not yet entered the realm of 3D flight.
The Edge is packed with
unique features like carbon reinforced fuselage
assembly, G10 composite reinforced landing gear
mounting structure, carbon fiber wing tube, carbon
fiber landing gear, carbon fiber micro tailwheel
assembly, fiberglass cowl and wheel pants, a set
of side force generators, 2 gorgeous high visibility
Ultracote color schemes and a complete decal set.
The Edge can easily be assembled in a single evening
by an experienced modeler.
canopy placement places the tallest portion of the
fuselage over the CG, which is optimum for best
knife edge performance.
airfoiled control surfaces utilizing geodetic construction
provide the ultimate in yaw, pitch and roll authority.
fiber longerons and motor box supports add enormous
strength and rigidity to the airframe, while G10/lite
ply composite laminates make for a robust landing
piece airfoiled molded carbon fiber landing gear
and tailwheel bracket provide solid ground handling
and contribute to the awesome appearance of the
-Long tail moment contributes to rock solid precision
flight performance and tracking.
loaded hatch latch provides instant access to battery
tray and interior of aircraft while providing a
solid attachment point for the canopy.
piece wing mounts on a carbon fiber wing tube and
is easily removed for transport.
elevator horn bolts on to stock servo arm to allow
for insane elevator travel.
-Rudder and elevator servo mount in the rear of
the aircraft and utilize a short direct drive carbon
fiber pushrod with ball link for slop free control
Side Force Generators add tremendously to the effective
side area of the EXP increasing rudder authority
and improving knife edge and high alpha stability.
gorgeous genuine Ultracote color schemes available
with expertly painted fiberglass cowl and wheel
hardware package and decal sheet included.
level of pre-fabrication allows you to get the EXP
in the air in as little as 3 hours!