65" Turbo Duster
Inspired by the latest turbine crop dusters, the Turbo Duster is a great sport scale and aerobatic model from Legacy Aviation. It is constructed of premium balsa and ply and covered in genuine Oracover/Ultracote. The Turbo Duster Uses 6 medium metal-gear servos, such as the Hitec Hs-5245MG, and includes big double-hinged flaps for all sorts of mixing possibilities.
Paired with our Torque 4016-500 motor and Airboss80 ESC, the Duster has unlimited vertical power on 6S 3000-4000mah lipo batteries and 16x7 prop. NOTE: The Duster is designed for low-pitch props, 7" pitch and lower.
The Duster makes a great rugged and friendly sport model, it can fly a variety of conventional and 3D aerobatic maneuvers, and it loves making low passes like its full-scale crop duster relatives. A carbon wing tube, carbon landing gear, lightweight and strong airframe, easy handling, quick assembly, easy-access hatch, and a complete high-quality hardware set add up to a fun and rewarding model aircraft you will be proud to own.
If you want a truly flexible airplane, order the optional composite color-matched float set (Coming Soon!). Custom-designed for the Duster, our floats are light, strong, include a complete double water-rudder setup, and you change the model back-and-forth from land to water in under 5 minutes with just one hex driver. NOTE: The float set requires one additional mini servo to operate the water rudder.
- RC Groups review of the 65" Turbo Duster. 65" Turbo Duster Assembly Manual
- Wingspan: 65"
- Length: 55"
- Wing Area: 747 Sq. Inches
- Weight: 5 lbs. without battery
- Torque 4016T/500 MKII
- AirBoss 80
- 16 x 7
- 3000-4000 mAh
- 52mm (2 inch)
Note: The 63mm spinner back plate must drilled or reamed to 8mm (5/16") for use with the Torque 4016T-500 motor.
- 6 x Hitec HS-225MG (Good)
- 6 x Hitec HS-5245MG (Better)
- 6 x Hitec HS-7245MH (Best)
- Qty. 6 Extreme Flight Lightweight Servo Arms - 1.25" single
- Elevator, Rudder 2 x 24"
- MPX 2-wire plug suggested for ailerons and flaps
- Ailerons 2 x 12"
- ESC 1 x 12"
- Flaps 2 x 6"