Omega 4.5" Carbon Fiber Spinner - 6 Bolt

This is a 4.5" diameter all-carbon fiber spinner. It is a center-bolt style spinner.

NOTE: The center bolt is not included, because different engines, motors, and applications require different center bolts.

This spinner can be used on gas or electric applications. The backplate center hole diameter is 10mm.

This spinner is pre-cut for up to 24" props. Some light clearancing may be needed for your particular prop blade shape.

This spinner is pre-drilled for the DA-120CC, DLE 111CC prop bolt pattern.

NOTE: If you wish to use this spinner in an electric application with a shaft smaller than 10mm diamter, you will need to provide a spacer for the backplate center hole.