Frank Gelatka writes, "I finally got all my graphics on the 110"! Here's my specs, DA100,not the L Version,stock exhaust, JR12X,JR 12ch. Powersafe RX, 42% A123 batts x 2,42% ignition kill, Hitec 5955tg's for the elevs., 7994sh X4 for ailerons,single 7980 for the rudder. Embry Riddle Graphics from B&E Graphixs.com This is my 5th Extreme Flight Rc plane,and it won't be my last !! Thanks again !!" No, Thank you Frank!
Team Extreme Belgium member Jens Van Dorpe sends us these pictures from the 3DCollege Big Scale Fly in in Belgium! Great showing for Extreme Flight airframes! We are told there is at least one 48" airframe that is missing... but it did well in the lowest flat spin contest! :)
Posted by on 4/13/2016
Chris Whitworth of Team McFueler sends us this picture.. Hmmm.. With Chris Whitworth at the controls.. and Adam Ranck spotting at the Corryton, TN Huckfest We think the Edge looks like a million dollars!
Allen Pineda sends this picture of his 78" Extra. His setup is: Motor - Scorpion 5525-225kv ESC - Turnigy sentilion HV 100amp. Servos - 5 turnigy 9150 Battery - 10S Rhino 3700mah Prop - APC 22x10 E Power - 3.4 KW.
Tom Kitt flying his Extreme Flight Extra 300 EXP 48" at MCRC. He is running the recommended Torque/Airboss combo on 3S LiPo batteries with Savox SH-0255mg servos. Thanks Tom!!
Bert Delare and "Team Aerobertics" from Belgium with their fleet of Extreme Flight high performance airframes. Beautiful shot guys!
Dan Landis writes, "Here are a few pics of the 70 inch Extra. I have to start off by saying its awsome!! If flies great. I have about 5 flights on it now and it really is amazing, super light and tons of power. My set up is a RimFire 120 with a Castle Ice 100 and a 6s 4550 mah Lipo. I am using Futaba 9650's on the elevators, Futaba 9156 on the ailerons and a Futaba 9157 on the Rudder. Thanks for designing such a great flying plane! Dan Landis" Thank you, Dan!
Team Extreme member, Daniel Holman having a little fun with the Extreme Flight 48" Edge 540t EXP. Daniel's Edge is powered with the Torque 2814/820 motor with an Airboss 45A Elite ESC. What a gorgeous flying site Daniel has
Tim Semeraro of Astoria, NY sent us this awesome shot of his MXS hovering mere inches over the snow. Tim is using a Hitec A9, Optima 7 receiver, 3 Hitec HS-65MGs, 1 HS-85MG, Airboss Elite 45 Amp ESC & Omega 130g outrunner motor With Hyperion 2200 3cell 30c packs. Tim says: "Extreme Flight's MXS EXP has changed the game! From its scale looks to its superior build quality, it doesn't get any better! Rock solid elevators, harrier and knife edge with no bad habits! The MXS is a must have plane! Fly Extreme!" Tim Semeraro, NY USA...
Here is a pic of Team Diesel... All Extreme Flight Edge 540's... Two have DA60s... One has DLE55... From left to right... Mark McClellan, Jimmy Ritch, Chris Whitworth... Fun weekend in the wind! Thanks Guys!
"3D Madman "Doc" Austin Brammer putting is 48" Extra 300 EXP through the wringer. Doc's Extra is powered by our Torque 2814T/820 and Airboss Elite 45 Amp ESC."
Justin Sebastian sends us this picture from a rare, recent warm day! His 88" Yak is powered with a DA-50 And the 48" Edge is powered with the Torque 2814/820 motor. Thanks for the Support!
"Chris, I received my 110” YAK in late 2009 and set it up to fly IMAC competition for 2010. Below is a listing of how the plane performed in IMAC competitions for 2010: 7 Southeast Region Senior 1st Places 5 Southeast Region Sportsman 1st Places, 1 Southeast Region Sportsman 3rd Place, Southeast Regional Championship IMAC Sportsman 1st Place, Southeast Regional Championship IMAC Senior 1st Place Southeast Regional Championship Sportsman 2010 Points Winner, Southeast Regional Championship Senior 2010 Points Winner Before I got this plane I had never won a contest. Boy I really Love this plane…. Charles T. Youngblood"
Team Extreme Pilot Avery Poole of Blythewood SC with his DA-60 powered 88 inch Yak-54. Avery's Yak also uses an MTW RE-3 tuned pipe. Nice job Avery!
William Kiehl from Germany flying his 48 inch Edge 540T EXP in the snow. William fabricated these custom carbon fiber skis for his Edge! He's not going to let a little bit of snow ruin his flying season. Nice work William!