
-
WINGSPAN 67 in. / 1.7 M
-
WEIGHT 8-8.5 lbs.
-
POWER T-Motor AM 670 Combo installed
EF - 67" Slick 580 - Blue/Orange - RxR
Extreme Flight - 67" Slick 580
The evolution of Extreme Flight's legendary Slick design continues with the release of the 67" Slick 580! Low and slow or fast and aggressive, the new Slick is well tested and highly refined. Featuring a carbon reinforced skeleton and two eye-catching Ultracote schemes, the Slick 580's appearance matches its incredible performance. Paired with T-Motor AM670 power combo and a 6S 4000-5000mah battery, the Slick is a lethal 3D/XA weapon to add to your arsenal!
The removable wing panels are mounted on a carbon fiber wing tube, fastened to the fuselage with our newest CNC quick locking wing latch system. New self aligning tail assembly allows EASY installation for the best results with the least amount of effort. All control surfaces are pushrod driven with short linkages and use ball links for slop free actuation with no binding. Optional quick assembly side force generators are included and add to the already generous side area, increasing yaw axis authority and adding stability in all angles of sideslip.
Ailerons and elevator are prehinged and sealed. 76mm cyclone spinner included. Expertly painted fiberglass cowl and wheel pants in 2 gorgeous high visibility Ultracote color schemes add the finishing touches and make this an airplane that you will be proud to show up at the flying field with.
Got RxR?
With an Extreme Flight RxR all of this performance comes preinstalled at at the factory and in about hour, you can go from box-to-flight! The amazing T-motor AM670 power system is fully-installed and ready to go. Requiring only a throttle calibration, no complicated motor and esc programming is necessary.
Fast and powerful Theta 989 HV servos with Extreme Flight 7075 aluminum arms are installed and ready. All servo extensions are installed. Even the XT-90 battery connector is installed.
Features:
- Latest Generation CNC locks for fast and secure wing assembly
- Quick install SFG's with machined thumb bolts
- Expertly applied genuine Ultracote covering material
- Pin hinges pre-glued on all surfaces
- Ailerons and elevators hinge gaps sealed
- Single wire rudder install for easy assembly
- Carbon Fiber landing gear and tailwheel assemblies
- Paint matched Cyclone spinner INCLUDED
- Bubble style wing bag with pockets for SFG's and wing tube INCLUDED